Reed Spline
Reed spline is used to hold the machined cane in the groove of the seat or back frame. It is import to get the correct size. If it is to small it will not hold in place and if it is to big it will flatten out when you drive it in. Use the chart below to determine the size of spline needed. The Chart is a close approximation, if you are unsure of the size you are welcome to send us a piece.
If you order reed spline by the foot please be sure to update the quanity in the cart. Also the longest continious piece is 12 feet on most sizes.
| Reed Spline Size | Width of Groove |
|---|---|
| #7 | 5/32in |
| #7.5 | 11/64in |
| #8 | 3/16in |
| #8.5 | 13/64in |
| #9 | 7/32in |
| #9.5 | 1/4in |
| #10 | 9/32in |
| Spline Size | By the Foot | Order | 30ft Coil | Order | 54ft Coil | Order |
|---|---|---|---|---|---|---|
| #7 Spline | $0.30 | $5.75 | $7.25 | |||
| #7.5 Spline | $0.30 | $5.75 | $7.25 | |||
| #8 Spline | $0.30 | $5.75 | $7.25 | |||
| #8.5 Spline | $0.30 | $5.75 | $7.25 | |||
| #9 Spline | $0.33 | $6.25 | $7.75 | |||
| #9.5 Spline | $0.38 | $6.85 | $9.20 | |||
| #10 Spline | $0.45 | $11.00 | $13.50 |
